Platforms and Requirements

embeNET works on many transceivers and radio modules, supporting both 2.4 GHz and sub-GHz bands worldwide.

embenet entry image

embeNET is a multi-platform solution

Our networking stack works on various hardware platforms mitigating the risk of supply chain disruption.

embeNET can be used on a number of hardware platforms including low-cost microcontrollers and radio transceivers. Our software is always based on an open-source portable part (a.k.a. port) which is the only part that changes between the platforms. Apart from the provided ports we can also adapt our software to your custom hardware, as long as it fulfills the requirements

Platforms

embeNET offers a flexible and scalable wireless communication solution designed to work seamlessly across a wide range of platforms. Our suite of software components, including the embeNET Node library, embeNET Border Router, and embeNET Portal, can be integrated into various hardware and operating systems to meet the needs of large-scale, low-power networks.

embeNET Node

Networking stack library for deeply embedded devices

6TiSCH-compatible embeddable wireless communication stack for low-cost microcontrollers.

Supported platforms

STM32WL
CC1312R
nRF52
The STM32WL System-On-Chip integrates both a general purpose microcontroller and a sub-GHz radio on the same chip. The chip integrates Arm® Cortex®‐M4 and Cortex®-M0+ cores and can be used by embeNET in 863-870MHz band with (G)FSK modulation.
Evaluate the platform with embeNET

Platform requirements

Microcontroller requirements to run embeNET Node library:

  • 128 kB FLASH memory (minimum)
  • 256 kB FLASH memory (recommended)
  • 32 kB RAM (recommended)
  • 16-bit timer
  • AES-128 peripheral (recommended)

Radio transceiver requirements:

  • IEEE 802.15.4 or BLE compatible
  • 863-870 MHz or 2.4 GHz radio band
  • EUI-64 (recommended)

embeNET Border Router

Software running on gateway devices

Border router software that manages the embeNET network and connects it to the LAN or to the Internet.

Supported platforms

Windows
Linux
FreeRTOS
The border router can be set up on a MS Windows OS to easily evaluate and develop the final solution.
Contact us for more details

Platform requirements

The border router is a CPU or MCU with an attached radio module (called root). Requirements for the root are the same as for embeNET Node stack plus:

  • UART interface (min. 115200bps)

Requirements for CPU / MCU running embeNET Border Router software:

  • 128 kB FLASH memory (minimum)
  • 256 kB FLASH memory (recommended)
  • 32 kB RAM (recommended)
  • 16-bit timer with resolution of 10..30us
  • AES-128 peripheral (recommended)

embeNET Portal

Web application

Web application for remote management of the embeNET networks.

Supported platforms

Cloud
On-premise
The embeNET Portal web application is hosted on our servers so a PC with a web browser is all you need to use it.
Demo

Platform requirements

No requirements to embeNET Portal. The web application is hosted on our servers.

Contact us

Any question or remarks? Just write us a message!

Contact Information

Feel free to get in touch